Riello SC SUN 300, Руководство пользователя

Страница: 18 / 36

18
MENU SEQUENCE AND STRUCTURE
Graphics or “overview” mode will appear if no key is
pressed for a period of 2 minutes, or if “esc” is pressed to
exit the main menu.
The “up and down” keys are used to scroll the list of sen-
sors and relays.
Pressing “esc”, the main menu reappears. The following
menus are available
Main menu
Storage S1 62°C
Storage S2 57°C
Exchanger S5 64°C
Collector S8 72°C
R1 on
1.Measurements
2.Statistics
3.Operating mode
4.Settings
5.Protections
OK
Exit main menu
1. Measurements Current temperature values with explanations
2. Statistics
General system control information, including hours operation
3. Operating mode
Automatic mode, manual mode, or controller Off
4. Settings Management of parameters required for normal operation
5. Protections Protection against solar radiation and frost, recooling, seizing, etc.
6. Special functions Program selection, sensor calibration, clock, additional sensor, etc.
7. Menu lock Protection against unintentional setting changes at critical points
8. Service data For diagnosis in the event of errors occurring
9. Language Language selection
1.MEASUREMENT VALUES
Menu “1. Measurement values” indicates the current tem-
peratures measured.
Quit the menu by pressing “esc” or selecting “Exit Meas-
urements”.
To quit Info mode, select “Overview” or press “esc”.
b
If “Error” appears in the display instead of the
measurement value, this could mean that there is
a temperature sensor either faulty or not connect-
ed properly. If the cables are too long or the sen-
sors not positioned correctly, there could be minor
deviations in the measurement values. In this instance, the values displayed can be compensated by making
adjustments via the controller. Follow the instructions given in heading “6.11. – Sensor calibration”. The types of
measurements actually displayed will depend on the selected program, the sensors connected, and the specific
design of the controller.
2.STATISTICS
Use menu “2. Statistics” for function control and long-
term monitoring of the system. To quit the Statistics menu,
press “esc” or select “Exit statistics”.
b
To run analyses on system data, the time must be
set correctly at the controller. Remember that in the
1.Measurements
1.Storage S1
62°C
2.Storage S2
57°C
3.S3
Exit measurements
2.Statistics
1.Hours operation
2.Accounting
3.Graphic overview
4.Message log
5.Reset/clear
OK
Exit statistics