Riello Residence Externa Condens KIS i, Инструкция пользователя

Страница: 35 / 40

USER
35
Fault
No.
Description
E55
Con fi guration error (no con fi gu-
ration)
E60 domestic hot water NTC error
E71 fl ow NTC error
E73 return NTC error
E74
fl ow temperature too high / low
water circulation
E 75
External temperature sensor
error
E79
low temperature too high / fl ow
and return

T error
E 80
Room temperature sensor error
E 81
EEPROM error This error indi-
cates a change in the memory
of the timed thermostat (e.g.
Via EMV). The default data are
loaded following the error. All
set values must be controlled.
E91
check and clean the primary
heat exchanger
E 201
No communication with the
boiler. Data transmission to the
boiler must be controlled.
RESET FUNCTION
In the presence of a de fi nitive lockout
on the boiler, displayed with the code
blinking on the display and the lighting of
a triangle on the right side of the display
next to the wording RESET, it is possible, for
enabled boilers, to reset directly from the
remote control.
The RESET function can be activated by
turning the "MODIFY" knob clockwise,
where a RESET command is then generated
that is equivalent to pressing the button on
the boiler and the reset command is sent to
the boiler. The arrow disappears after the
sending of the RESET command.
9
If the RESET trials do not turn on the
boiler, call the Technical Assistance
Service.
RESET FAULT 41
Check the pressure on the hydrometer, if
less than 0,5 bar, proceed as follows:

Turn the knob SELECTION on MODE,
using the rotary knob, select

Make sure that the cold water inlet
valve is open

Unscrew the screw (A) fi xing the lower
cover

Load slowly opening the fi lling valve
until the hydrometer needle is posi-
tioned between 1 and 1.5 bar

Close the fi lling cock

Set the operating mode desidered.
If the pressure drop is very frequent,
request the intervention of Riello Sales
Service.
RESET FAULT AND FRAMES 60
The boiler works regularly, but does not
guarantee the stability of the sanitary
water temperature, which, however, is
supplied to a temperature close to 50 ° C.
It required the intervention of the Sales
Service Riello.
A
fi lling cock hydrometer