Riello Residence Externa Condens KIS i, Инструкция пользователя

Страница: 24 / 40

USER
24
1.3 General remarks
Before starting... some clari fi cation to
better understand how the Heating-DHW
system and its control function.
Heating water
this is the water fl owing in the radiat-
ing elements after being heated by the
boiler.
Domestic water supply
is the water fl owing within the sanitary
ware.
Fault code
is a code that appears on the display
and signals possible malfunctions of the
boiler or the control panel.
Initial con fi guration
this is the con fi guration in which the
control panel appears after the fi rst ig-
nition or after a reset.
Display
is the LCD board on which all symbols
corresponding to the various functions
are displayed.
Anti-freeze mode
this is the mode that prevents a pos-
sible drop in temperature freezing the
water fl owing in the pipes thereby caus-
ing damage to the heating system. This
function is activated when the tempera-
ture drops below 5° C.
Control panel reset
this operation allows to restore the in-
itial con fi guration of the control panel,
resetting any user programming, with
the exception of the system clock.
Summer condition
this is the status in which the control
panel must be set when the heating sys-
tem functions are not necessary (e.g..
spring, summer). The boiler is capable of
delivering domestic hot water only.
Automatic heating and continuous
heating operation
this is the status in which the control
panel must be set when the heating sys-
tem has to be activated (e.g. autumn,
winter). The boiler is capable of deliver-
ing both domestic hot water and heating
water.
Comfort level temperature
this is the temperature which allows to
have an ideal heating of the environ-
ments.
Economy level temperature
this is the temperature that is used when
rooms are unoccupied, or at night.
Ambient temperature
this is the temperature measured in the
room in which the remote controls panel
is installed.
Outdoor temperature
this is the temperature measured out-
side the house through the external sen-
sor connected to the boiler.
Temperature curve
this is the relation between the outdoor
temperature and the temperature of the
heating water. If the external probe is
installed in the boiler, the heating water
temperature is automatically adjusted to
the changes of the external temperature
so as to maintain a constant temperature
in the environment. The temperature
curve must be selected by the installer
based on the geographical location and
the type of system.
NOTE
The ambient temperature foresees a dis-
play interval between 0° C and 99° C.
The outside temperature foresees a dis-
play interval between -39° C and +39° C.
Temperatures outside these ranges are
displayed with three dashes "- - -".