background image

20158125

GB

Safety and prevention

3.4

Personnel training

The user is the person, body or company that has acquired the
machine and intends to use it for the specific purpose. He is re-
sponsible for the machine and for the training of the people work-
ing around it.
The user:

undertakes to entrust the machine exclusively to suitably
trained and qualified personnel;

undertakes to inform his personnel in a suitable way about
the application and observance of the safety instructions.
With that aim, he undertakes to ensure that everyone knows
the use and safety instructions for his own duties;

Personnel must observe all the danger and caution indica-
tions shown on the machine.

Personnel must not carry out, on their own initiative, opera-
tions or interventions that are not within their province.

Personnel must inform their superiors of every problem or
dangerous situation that may arise.

The assembly of parts of other makes, or any modifications,
can alter the characteristics of the machine and hence com-
promise operating safety. The manufacturer therefore
declines any and every responsibility for any damage that
may be caused by the use of non-original parts.

In addition:

must take all the measures necessary to pre-
vent unauthorised people gaining access to
the machine;

the user must inform the manufacturer if
faults or malfunctioning of the accident pre-
vention systems are noticed, along with any
presumed danger situation;

personnel must always use the personal pro-
tective equipment envisaged by legislation
and follow the indications given in this man-
ual.

Содержание RDB 3.2 BT 58/70





























Отзывы: