5841
10
F
4.5
PRESSOSTAT AIR
4.6
REGLAGE DE LA TEMPERATURE DE PULVERISATION
Thermostat de réglage - de minimum - de maximum
Le thermostat de réglage électronique, par l’intermédiaire d’une sonde PT 100 immergée dans le collecteur
de refoulement de l’huile combustible, règle la température de pulvérisation. (Pour une pulvérisation correcte, se
reporter au diagramme température/viscosité ci-dessous)
Exemple: une huile combustible 7 °E à 50 °C devra être préchauffée à 110 °C.
Important: la température présélectionnée sur le thermostat correspond à la température du fluide; vérifiez
toutefois sur le thermomètre la correspondance après quelques minutes de fonctionnement.
La led allumée précise le branchement correct des résistances.
Le thermostat de minimum, non seulement arrête le brûleur si la température du combustible descend au-
dessous d’une valeur critique pour une bonne combustion, mais il valide aussi le démarrage du brûleur.
(Tarage d’usine à 80°C. Réglage possible en ôtant le couvercle du préchauffeur et sa plaque).
Le thermostat de maximum neutralise les résistances lorsqu’à la suite d’une panne du thermostat de ré-
glage il se produit une hausse sensible de la température dans le réchauffeur. La signalisation d’alarme
éventuelle (haute température) peut être obtenue par branchement au bornier du brûleur. (Tarage d’usine
à environ 180°C).
Effectuer le réglage du pressostat de l'air après avoir
fait tous les autres réglages du brûleur avec le pres-
sostat de l'air réglé en début d'échelle.
Avec le brûleur fonctionnant à la puissance MIN aug-
menter la pression de réglage en tournant lentement
dans le sens des aiguilles d'une montre la poignée
prévue à cet effet jusqu'au blocage du brûleur.
Tourner ensuite la poignée dan le sens contraire à
celui des aiguilles d'une montre pour une valeur cor-
respondant à environ 20% de la valeur réglée et
contrôler ensuite si le brûleur démarre correctement.
S'il se bloque encore, tourner à nouveau un peu la poi-
gnée dans le sens contraire à celui des aiguilles d'une
montre.
D68
°C
mm
2
/s °E
Température de pulvérisation
V
is
c
o
s
it
é
à
5
0
°
C
D2746
D2747
Thermomètre
Sonde thermostat réglage
Préchauffeur
Déchargement impuretés
Thermostat min.
Thermostat max.
2848