Riello KOMBI 1000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 24

INSTALLATION 12
HANDLING
Once you have removed the outer packaging, proceed
as follows to unpack and handle the combination storage
cylinder.
b
Wear suitable personal protective equipment and
use suitable safety devices.
a
Do not leave packaging material within the reach of
children, since it can become a potential hazard.
17
Make sure that any lifting equipment is of adequate capa-
city to lift and move the storage cylinder.
Proceed as follows to remove the storage cylinder from
the pallet.
- Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is
able to support the weight of the storage cylinder.
- Remove the brackets then carefully rotate and slide the
storage cylinder off the pallet on to the platform.
- Make sure that the storage cylinder is perfectly stable,
and then remove the pallet.
- Carefully rotate and slide the storage cylinder off the
platform on to the floor.
- Remove the platform. Position the storage cylinder as
required.
Fit the feet provided into the holes in the bottom of the
storage cylinder and adjust as necessary to compensate
for any unevenness in the floor.