Riello FAMILY AQUA CONDENS 3.5 BIS Скачать руководство пользователя страница 26

Страница: 26 / 68

Family Aqua Condens 3.5 BIS

O - Faults shown on the display

When there is an operation fault, the display shows a flashing code
and the RESET and

icons (simultaneously or otherwise).

P - Resetting the faults

Wait about 10 seconds before resetting normal operating conditions,
Then proceed as follows:

1. Displaying only the icon

The appearance of the indicates that an operation fault has been
diagnosed and the boiler will attempt to resolve it autonomously
(temporary stop).
If the boiler does not resume normal operation, there are two possi-
ble display scenarios:

Case A

disappears, and the RESET icon appears along with a different

alarm code.
In this case, proceed as described in point 2.

Case A - temporary fault

Case A - definitive fault

Case B
The RESET icon will appear along with a different alarm code, to-
gether with the

In this case, proceed as described in point 3.

Case B - temporary fault

Case B - definitive fault

Case C
Together with

the RESET icon is displayed and a different alarm

code.
In this case, proceed as described in point 3.

2. Display only of the RESET icon

Press the

key to restore operation. If the boiler performs the firing

procedure and resumes normal operation, the stoppage can be at-
tributed to a chance situation.

Repeated lockouts require the intervention of the Riello Technical
Assistance Centre.

3. Displaying the RESET icons and

requires the intervention of

the Riello Technical Assistance Centre.

Fault on the domestic hot water circuit probe - 60.
The fault code is only displayed in standby.

Fault J0-J1 (faults regarding connections to the board) requires the
intervention of the Riello Technical Assistance Centre

Fault J0 - J1 (card connection faults):
the intervention of the Riello Technical Assistance Centre is needed.

Only the

icon lights up, and the alarm code appears:

FAULT DESCRIPTION

Alarm

code

RESET

icon

Icon

FLAME FAILURE LOCKOUT (D)

YES

PARASITE FLAME (T)

YES

NEW ATTEMPT IN PROGRESS (T)

MINIMUM GAS INPUT
PRESSURE (T)

YES

MINIMUM GAS INPUT
PRESSURE (D)

YES

LIMIT THERMOSTAT (D)

YES

FLUE GAS PROBE
SHORT CIRCUIT (D)

YES

DELIVERY PROBE LIMIT
TEMPERATURE (D)

YES

DELIVERY PROBE LIMIT
TEMPERATURE (T)

YES

RETURN PROBE LIMIT
TEMPERATURE (D)

YES

RETURN PROBE LIMIT
TEMPERATURE (T)

YES

Содержание FAMILY AQUA CONDENS 3.5 BIS





































































Результаты поиска

Содержание FAMILY AQUA CONDENS 3.5 BIS

Отзывы:

Похожие инструкции для FAMILY AQUA CONDENS 3.5 BIS

Бренды по названию

Популярные бренды

Riello FAMILY AQUA CONDENS 3.5 BIS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FAMILY AQUA CONDENS 3.5 BIS

Отзывы:

Похожие инструкции для FAMILY AQUA CONDENS 3.5 BIS

Бренды по названию

Популярные бренды