Wi
-
Fi Box
Installation
B
5
In the case of a wireless BeSMART installation, connect the (supplied)
USB Wi-Fi Box cable to the boiler OT-Bus connection (for specific
boilers) or to the boiler room thermostat connection (TA or ON/OFF).
Attach the Wi-Fi Box to the appliance casing, using
the magnetic pad located on the rear of the Wi-Fi
Box. Please check the ambient temperature is
according the product specification as indicated in
the installation manual. In
case of installation wireless,
low Wi-Fi signal and boiler RF receiver installed, place
the Wi-Fi Box in an ambient with a good Wi-Fi signal
(above 30%).
Attention: for the electrical connection and the technical specifications, please
refer to the installation manual. (OT PCB plug supplied as standard)
USB
For a wireless installation, insert the other end
of the USB cable into the
OUTPUTS/BOILER
socket of the Wi-Fi Box.
USB
USB mini B
Using the mini USB cable
and power adaptor
(supplied); connect the Wi-Fi
box to an adjacent electrical
socket .
TA = Black
OT =
R
ed
O
utp
uts
/B
oil
er
