Preparation
Before installation
•
Refer to the appliance manual to ensure that the BeSMART thermostat is compatible with your
boiler
•
The BeSMART wireless thermostat can be installed almost everywhere within the home, however
please refer to the adjacent diagrams for guidance when deciding on a suitable location.
•
The BeSMART thermostat can also be used to replace an existing hard-wired thermostat (please
check appliance manual to ensure compatibility).
•
Switch off and isolate the appliance and any external controls from the electrical supply, before
carrying out the installation.
Tools required for the installation
•
Phillips screwdriver
•
Small flat blade screwdriver
•
Combination pliers
Avoid draughty areas
Do not install above heat sources
Avoi
d direct sunlight
Install at the correct height
2
