Riello UPS Sentinel Dual SDU 10000, Инструкция по установке и эксплуатации

Страница: 45 / 48

- 45 -
OTHER DATA
Leakage current towards ground [mA] < 1,5 ≤ 1,7
Room temperature
(7)
[°C] 0 – 40
Humidity < 90% without condensation
Protection devices
excessive battery discharge - over current - short circuit - over
voltage - under voltage - thermal
Dimensions W x D x H [mm]
131 x 640 x 448 - Tower
19” x 640 x 3U - Rack
2 x (131 x 640 x 448) – Tower
2 x (19” x 640 x 3U) - Rack
Dimensions W x D x H
(only for ER versions)
[mm]
131 x 640 x 448 - Tower
19” x 640 x 3U - Rack
131 x 640 x 448 - Tower
19” x 640 x 3U - Rack
Weight [Kg] 45 46 19 + 62 20 + 62
Weight (only for ER versions) 20 21
BATTERY BOX MODEL KSDV180P----NP- KSDV240P----NP-
Rated voltage [Vdc] 180 240
Dimensions W x D x H [mm]
131 x 640 x 448 - Tower
19” x 640 x 3U - Rack
Weight [Kg] 42 52
For additional details regarding technical data refer to website
(1) @ rated load, rated voltage of 220 VAC towards Neutral, battery charging
(2) For the input technical data of the TM model with “1 ~ ” single-phase input, refer to the “SINGLE-PHASE INPUT” section in
the table
(3) In the Bypass operating mode, all the load current is absorbed by the Phase 1 input line
(4)
The recharging current is regulated automatically according to the capacity of the battery installed. Derating of the current
delivered with a load greater than 80%.
(5)
To maintain output voltage within the accuracy range specified, recalibration may be necessary after a long period of
operation.
(6)
If the mains frequency is within ± 5% of the selected value, the UPS is synchronized with the mains. If the frequency is out
of tolerance range or in battery operation, the frequency is that selected ± 0.1%.
(7)
20 - 25 °C for maximum battery life.