Riello UPS Sentinel Dual SDU 10000, Инструкция по установке и эксплуатации

Страница: 28 / 48

- 28 -
M
EASUREMENT DISPLAY AREA
The front panel can be used to display important UPS operating information. When the UPS is switched-on, the display shows
the main voltage value.
To display a different measurement, press the “SEL” button repeatedly until the desired measurement appears.
In the event of a fault/alarm (FAULT) or a lock (LOCK), the display will automatically show the type and code of the
corresponding alarm.
Some examples are shown below:
I
NDICATIONS ON THE DISPLAY FOR
UPS
WITH SINGLE
-
PHASE CONNECTION
GRAPHIC EXAMPLE
(1)
DESCRIPTION
GRAPHIC EXAMPLE
(1)
DESCRIPTION
Mains voltage
Residual battery
autonomy
Mains frequency
Battery charge
percentage
Bypass line voltage (“DI”
versions only) (2)
Total battery voltage
Bypass line frequency (“DI”
versions only)
(2)
Applied load percentage
UPS output voltage
Current absorbed by the
load
Output voltage frequency
UPS internal
temperature
Fault / Alarm
(3)
: the
corresponding code is
displayed
Lock
(3)
: the
corresponding code is
displayed
(1)
The values shown in the images in the table are purely as an indication.
(2) The visualisation of the sizes for the bypass line appear on the display only when the “SEPARATED BYPASS LINE”
function is set from the configuration software.
(3) The FAULT / LOCK codes can only be displayed if they are active (presence of a fault/alarm or a lock).