Riello UPS Sentinel Dual SDU 10000, Инструкция по установке и эксплуатации

Страница: 21 / 48

- 21 -
Models 8-10 kVA with three-phase input “TM”
FOR CONNECTION TO A THREE-PHASE LINE WITH NEUTRAL, CONNECT THE THREE PHASES AND THE
INPUT NEUTRAL TO “L1”, “L2”, “L3” AND “N”. MAKE SURE THAT THE SWITCH IS IN POSITION “
↑ 3~”.
FOR CONNECTION TO A SINGLE-PHASE LINE, CONNECT THE LIVE AND THE INPUT NEUTRAL TO “L1”
AND “N”. SET THE SWITCH TO POSITION “
↓ 1~”. TERMINALS L2 AND L3 MUST REMAIN FREE.
NOTE
1. If an "external manual bypass" is not provided, make sure that there is a jumper between terminals 1 - 2 (Switch bypass).
2. The maximum cross section of the cables that may be inserted in the terminal board 1, 2, 3 & 4 are:
- 2,5
mm
2
for bare cables
- 1,5 mm
2
for cables with lugs.
The stripping length is 8 mm