67
Bolero User Manual A20
3.5.5 Firmware Update
This chapter describes the update procedure of Bolero Nodes (Bolero-Antennas and Artist-AES67 client cards). The
following devices are required:
ü
PC
ü
Bolero firmware package (for example "bolero_v1.23-456.package")
ü
Network Switch (optionally with PoE+ functionality)
ü
Bolero Nodes (Antennas and AES67 client cards to be updated)
·
Attach the 'AES56/Config' connector of the
Bolero-Antennas to the network switch(es). If
the Antennas are connected to a 'PoE+' switch,
they are also powered via the switch.
·
Otherwise power the Antennas via external DC
power supplies.
After the Antennas' bootup is finished, the
respective IP address is displayed in the bottom
right in the Antennas display (for example
192.168.41.150).
Figure 84: Antenna display
Open the web interface of an Antenna:
·
Enter the IP address in the Web-Browser (e.g.
192.168.41.150).
In this example the Bolero Net consists of one
Antenna and one AES67 client card.
Figure 85: Web interface of the Antenna
·
Log into the Net by clicking on the lock symbol.
Figure 86: Login
A dialog is opened to enter the
Admin-
PIN
of the Net.
·
Enter the
Admin PIN
, that was
defined when the Net was created.
Figure 87: Dialog – Admin PIN
Содержание Bolero
Страница 1: ...User Manual A20 03 000HB01EG Bolero Next Generation Wireless ...
Страница 80: ...80 Bolero User Manual A20 5 4 Notes ...
Страница 81: ...81 Bolero User Manual A20 Notes ...
Страница 84: ...www riedel net Riedel Communications GmbH Co KG Uellendahler Str 353 42109 Wuppertal Germany ...