Riedel Bolero, Руководство пользователя

Страница: 20 / 84

20
Bolero User Manual A20
Registration Register to net
*1
Registers the Beltpack to an existing net. A list of available nets are
displayed:
·
Over The Air (OTA)
Connect to pre-
registered net Registers the Beltpack to previous registered nets. A list of available pre-
registered nets are displayed:
·
Select one to connect
·
Currently connected net is shown with radio select icon
Delete pre-
registered net Deletes previous registered nets in the Beltpack. A list of pre-registered
nets are displayed:
·
Select one to delete
Admin
*2
Registration
Mode Local Beltpack NFC Registers a Beltpack at an already registered
Beltpack via NFC:
·
NFC (local BP) active as long as you exit
Over The Air (OTA) Registers a Beltpack at an already registered
Antenna via DECT:
On , Off (all Antennas)
Antenna NFC Allows registering a Beltpack at an already
registered Antenna via NFC:
On , Off (all Antennas NFC)
Timeout After elapsing this time, the registration mode
is disabled:
Off
, 1 ... 60 min. [ 2 ] (for OTA,
System wide NFC, Charger)
OTA Pin Defines the legitimation during OTA registration
Disable PIN No PIN entry is required for OTA registration.
Set new Pin Insert a new 4 digit PIN that is required for the
OTA registration.
Set to Admin Pin Defines to use the Admin PIN for OTA
registration.
Admin Pin Defines the legitimation to open the Admin menu in the Beltpack or to
log into the web interface of the Antenna.
Disable PIN No PIN entry is required for administration.
Set new PIN Insert a new 4 digit PIN that is required for
administration purposes.
Time Source Selects the synchronization source of the Beltpacks time setting:
PTP, NTP, Internal
System Time Allows entering the system time if the time source is set to
Internal
.
System Date Allows entering the system date if the time source is set to
Internal
.
Time Format Define the time format:
12h, 24h
Date Format Defines the date format:
(dd/mm/yyyy, mm/dd/yyyy, yyyy/mm/dd)