18
05/2010
Rieber GmbH & Co KG
Adjust the time.
•
At top:
The indicator flashes on the chamber temperature function button
•
(flashing = may be changed)
Adjust the temperature.
•
At bottom:
The indicators flash on the buttons for core temperature and steam
(only possible at bottom) (flashing = may be changed).
Adjust lower core temperature:
Press the core temperature function button.
•
Setting is done like in the case of the temperature function button.
Adjust the steam (steam only possible for lower chamber).
Press the Start -button.
•
The selected program starts with the stored settings.
Press STOP – button and keep it pressed for approx. 5 seconds:
•
Back to functions. These can be re-adjusted. The program currently
running will not be interrupted.
Press STOP – button again an keep it pressed for approx. 5 seconds:
•
Back to program selection. The program currently running will be
stopped.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Standby mode is activated.
Program 6: Menu (for calling up stored menus)
•
Menu no. flashes in the display.
Turn the dial to select required menu no. Y.
•
Indicator of program symbol for menu no. Y flashes.
Press the dial to open menu no. Y.
Press the Start - button.
•
Menu No. Y starts (stored menu No. 1, 2 , 3, 4 or 5 with the relevant
settings).
Press STOP – button and keep it pressed for approx. 5 seconds:
•
Back to the functions of the program stored under menu no. Y. These
can be re-adjusted.
•
Stored menu no. Y is not overwritten. The altered settings are
performed once through.
•
The program currently running will not be interrupted.
Press STOP – button again and keep it pressed for approx. 5 seconds:
Back to program selection.
•
The program currently running will be stopped.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Standby mode is activated.
