10
05/2010
Rieber GmbH & Co KG
4.4.2 Dangers due to electricity
WARNING!
Potential electrical hazard in the case of incorrect electrical connection.
•
The unit may only be commissioned by an instructed person
or a qualified electrician.
•
Check the mains voltage, type of current and connected load. Check that these
match the specifications on the type plate.
•
The socket outlet must be easily accessible so that the unit can be disconnected
from power supply at any time.
•
The cable must be routed such that it cannot be squeezed or overheated.
WARNING!
Potential risk of fire due to heat build-up.
•
Unwind the cable from the spool to prevent any heat build-up or cable fire. The
coupling must have splash protection, must be made of rubber or be rubber-
coated. The cable cross-section must be an appropriate size for the power
consumption of the modules.
•
Before connecting the product, compare the connection data (voltage and
frequency) on the type plate with that for the power supply.
DANGER!
Danger of electric shock. Risk of death.
•
Before each use, inspect the product, the connecting plug and electric cable for
any visible signs of damage.
4.4.3 Danger by unstable position
WARNING!
•
Prevent the product from running away accidentally using the two parking brakes.
•
Only park the product on flat surfaces.
4.4.4 Dangers due to hot surfaces, burns and explosions
WARNING!
One can burn one´s hands and arms on the hot surfaces around the heating and its
environment.
When you remove the door or cover from the appliance during hot holding of meals, hot
water vapour might escape and cause scalding.
•
Where possible wear protective gloves.
•
Open doors or covers carefully.
•
Keep combustible materials away from the product.
•
Keep unauthorised persons away from the product.
•
Never operate the product unsupervised.
•
Only use Gastronorm containers made from heat-resistant or non flammable materials, otherwise there
is a risk of fire.
