14
05/2010
Rieber GmbH & Co KG
6.1.2 Use
General
Switching on the appliance
•
For heating with water / steam, please fill in water before.
•
Plug in the connecting plug.
•
Standby indicator will light up.
Turn the control dial (7) until the indicator for the required program lights up.
Press the dial to open the required program.
•
The corresponding indicator lights up.
Depending on the selected program you can now set the chamber temperature, core temperature,
time and steam using the function buttons .
•
The corresponding indicators on the function buttons flash.
Chamber temperature function button
During operation:
•
The current chamber temperature is displayed.
LED flashes:
•
Press the button to display the target temperature.
Adjusting the target chamber temperature:
Keep pressed function button (12). Turn the dial (7) to set the target chamber temperature.
Release the function button.
•
The adjusted value is saved automatically.
Calling up the target temperature:
Press the chamber temperature function button.
•
The target temperature is displayed.
•
After approx. 10 seconds the display will revert to the current chamber
temperature.
Core temperature function button
During operation
•
The current core temperature is displayed.
LED flashes:
•
Press the button to display the target temperature.
Adjusting the target core temperature:
Keep pressed function button (11). Turn the dial to set the target core temperature.
Release the function button.
•
The adjusted value is saved automatically.
Calling up the target core temperature:
Press the core temperature function button.
•
The target temperature is displayed.
•
After approx. 10 seconds the display will revert to the current core temperature.
