manualshive.com logo in svg

RIDGID SeekTech ST-33Q+, Руководство оператора

Поделиться
Скачать
RIDGID SeekTech ST-33Q+ Скачать руководство пользователя страница 27

English   –   27

Reset to Factory Default

Note: Restoring the factory default settings will not erase 
user-defined frequencies or reset the Odometer stored 
values.

From the Information screen, press the Select key   to 
bring up the option to restore the ST-33Q+ to the default 
factory settings.

To reset the ST-33Q+ to the factory default settings, press 
the Up and Down Arrow keys 

 to highlight the Factory 

Reset option 

 and press the Select key   .

To erase all custom frequencies, highlight the second 
option in the Factory Reset Menu 

 and press the 

Select key   .

To exit the Factory Reset Screen without making chang-
es, highlight the   icon and press the Select key   or 
press the Menu key   .

Software

Software updates for the ST-33Q+ are released through 
HQ. You must register your ST-33Q+ in HQ’s Equipment 
Locker to receive updates. 

Updating ST-33Q+ Software

Register your ST-33Q+ in HQ’s Equipment Locker to be 
automatically notified when software updates become 
available.

Note: A mini USB cord is required for updating the ST-
33Q+. 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание SeekTech ST-33Q+
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды