English – 11
Kick Stand Positioning
The kick stand on the ST-33Q+ gives you control over the
angle of the unit. Use the kick stand to improve screen
visibility and access to the keypad.
Cable Lead Clips
The ST-33Q+ features cable lead clips that can be at-
tached mechanically or magnetically. Before connecting
the leads, use the teeth on the clip to scrape off rust or
paint. When the metal is exposed you can either clip onto
the target with the teeth or use the magnet to make the
connection.
NOTICE
The cable lead clips contain strong mag-
nets. Do not place the clips near data
storage devices, credit cards, or other
magnetically encoded data.
High Voltage Indicator
WARNING
The ST-33Q+ is designed to withstand up to 240 VAC
between the two leads. This protection is not intend-
ed to be used continuously and excess current may
be forced through the ST-33Q+. To reduce the risk of
electrical shock, do not touch the transmitter, cords,
or connections during this time. Use high voltage
precautions to disconnect the ST-33Q+.
If the ST-33Q+ senses excess current, a warning mes-
sage appears on the screen, a warning beep sounds,
and the High Voltage LED below the keypad is lit.
High Temperature Warning
If the internal temperature of the ST-33Q+ reaches 75°C
[167°F] an alert displays on the screen and signal out-
put is automatically reduced. If the internal temperature
reaches 80°C [176°F], signal output is immediately sus-
pended. Power off the ST-33Q+ to avoid damage and in-
jury and contact a RIDGID Independent Authorized Ser-
vice Center before using the ST-33Q+ again.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
