16 – English
Powering the Transmitter
When the two units are connected with Bluetooth, pow-
ering the receiver on or off automatically powers the
transmitter on or off.
The receiver alerts you to changes in the transmitter’s
power status.
Switching to internal
batteries.
Powered off due to
Power key press.
Powered off due to
low battery.
Setting the Frequency
Changing the receiver’s frequency automatically updates
the transmitter’s frequency to match. If the frequency is
changed on the transmitter, the receiver automatically
updates to match as well.
Transmitter Control Screen
When the devices are connected, you can see the trans-
mitter’s screen from the receiver. The transmitter control
screen allows you to control the transmitter’s frequen-
cy mode, choose between direct connect or inductive
mode, and adjust output power remotely. You can also
remotely power the transmitter on or off and know if the
transmitter has powered off unexpectedly.
Any changes made on the transmitter to frequency, di-
rect connect or inductive mode, and output power can be
seen on the receiver.
To open the transmitter control screen on the receiver,
press the Menu key , then press the Right Arrow key
to toggle in and out of the transmitter’s control screen.
If more than one Bluetooth enabled SeekTech trans-
mitter is present, press the Left Arrow key to cycle
through available transmitters. Press the serial number
listed below the transmitter icon to identify the specific
transmitter you want to control.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
