3 - English
gENERAL SAFETY RULES
wARNiNg!
Read all instructions
Failure to follow all instructions
listed below may result in electric shock, fire and/
or serious injury. The term “power tool” in all of
the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE iNSTRUcTiONS
wORk AREA SAFETY
keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
ELEcTRicAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. keep cord away
from heat, oil, sharp edges or moving parts.
Damaged
or entangled cords increase the risk of electric shock.
when operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use.
Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.
Use safety equipment. Always wear eye protec-
tion.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in.
Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
do not overreach. keep proper footing and balance
at all times.
This enables better control of the power tool
in unexpected situations.
dress properly. do not wear loose clothing or jewelry.
keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
if devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of these devices can
reduce dust-related hazards.
do not wear loose clothing or jewelry. contain long
hair.
Loose clothes, jewelry, or long hair can be drawn
into air vents.
do not use on a ladder or unstable support.
Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POwER TOOL USE ANd cARE
do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
Maintain power tools. check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. if damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
keep cutting tools sharp and clean.
Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work
to be performed.
Use of the power tool for operations
different from those intended could result in a hazardous
situation.
