6
When stacking units, position the four foot
bumpers on the recessed stacking pads.
The units conveniently “stack” for storage,
as shown, no more than two (2) units high.
Storage
PREFERRED POSITION
ALTERNATE POSITION
(Your Unit May Not Be As Illustrated)
Maintenance
Cord Maintenance
When use is complete, unplug the cord
and wrap it around the cord wrap area
as shown. If the power cord is damaged,
it must be replaced by the manufacture
or their service agent or by qualified
personnel in order to reduce the risk of
accident.
Storage
Before storing your Air Mover, the cord
should be wrapped around the unit.
The Air Mover should be stored indoors.
Cleaning Your Air Mover
If the polypropylene housing becomes
soiled it may be wiped off with a damp
cloth.
Make sure inlet grills, exhaust grille and
blower wheel surfaces remain clean of
dust and dirt build-up.
Wheels
(AM25600 & AM22880)
If your wheels are noisy, you may put a
drop of oil on the roller shaft to make them
quieter.
CAUTION:
Do not operate Air Mover when
stacked on top of each other.
Do not stack more than 2 high.
!
Cord
Cord Wrap Area
(Your Unit May Not Be As Illustrated)
SP7019-1 3-Speed Air Mover 01 2020.indd 6
1/23/20 1:58 PM
