Ridder LogicLink RLL400, Руководство по эксплуатации продукта

Страница: 21 / 32

6. USER INSTRUCTIONS
6.1 Usage - Conditions and starting points
The conditions and starting points that follow are applicable when you use the RLL400 control-unit.
Automatic Control
Temperature
Waiting time
6.2 Status LEDs
The four LEDs D1 (green), D2 (red), D3 (red) and D4 (red) on the control board (A2) give status
indication of the system. This information is important for troubleshooting.
Refer to §9.1 and §9.2. These sections tell about malfunctions and blink codes that can occur.
If a manual control (MC) (277950) is connected, the two LEDs (green and red) agree with the LEDs
D1 and D2 on the control board (A2). The control board (A2) and the manual control (MC) show the
blink codes (D1 and D2) at the same time.
The motor can start and stop automatically without a warning.
Persons can be in danger of life if they touch a system that is in
operation.
The motor can start and stop automatically without a warning but
will stay energized. De-energize the system during work on the drive
unit or the system. Persons can be in danger of life if they touch a
system that is in operation.
A drive unit can get high temperatures. If necessary take protective
precautions to prevent injuries.
The waiting time must be approximately 2 seconds when you change
the direction-of-rotation. The electric motor must stop.
This prevents that it continues in the initial direction.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
ridder.com
21