Ridder LogicLink RLL400, Руководство по эксплуатации продукта

Страница: 22 / 32

6.3 Operation
This section tells about the operating functions of the RLL400 control-unit connected to a Ridder
manual control (MC) (277950) and an automatic control-system (ACS). Always refer to the related
information and manuals (ACS and MC).
LED - Red LED - Green
Before you use the manual control, make sure that the green LED on the manual control (and D1 on
control board A2) is on.
Blink code 1.1 gives the indication: No malfunctions, the control unit operates correctly.
Refer to §9.2.
The switch with five positions has the four functions that follow:
1. The system is manually controlled in direction A or B. The system is controlled independently
also if there is an automatic 24 V AC/DC control signal (ACS).
2. The system is put in Automatic mode.
The system is controlled if there is an automatic 24 V AC/DC control signal (ACS).
3. The system is manually stopped if the switch is set to position “0”.
4. The error messages are erased if the switch is set to position “0”.
Function Description
1
Direction A
3
4
The manual control does not control the electric motor.
Position to erase error messages after a malfunction.
0
2
Automatic mode , the control unit operates when it receives
external control from an ACS.
3
4
The manual control does not control the electric motor.
Position to erase error messages after a malfunction.
0
1
Direction B
Control signals from an automatic control system (ACS) are only
processed if the manual control (MC) is in Automatic mode.
Automatic mode is only in operation if there is an automatic control
signal (ACS).
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
ridder.com
22