•
The responsibility for precautions and warnings lies with the installer of the system. Refer to the,
local or national, laws and regulations of the country if a certification (mark) is necessary.
•
Parts of the electrical or electronic installations are connected to dangerous electrical voltages.
Work without professional competence or not obeyed warning instructions could cause injury
and/or material damage.
•
Ridder is not responsible for injury, material damage or consequential damage if accessories are
used that Ridder did not make.
TRANSPORT, STORAGE AND PACKAGING
The conditions and instructions that follow are applicable.
•
Ambient temperature: -15 to +60 °C (+5 to +140 °F).
•
Ambient: A not-condensed relative humidity is necessary.
•
Do a check for transport damage and missing parts immediately on incoming goods.
•
Tell damages and missing parts immediately to the transport company and to your local After
Sales contact person.
•
Do not use damaged products and if necessary do not start the work.
•
Send the product to the installation site before it is removed from the (sealed) packaging. This
prevents damage (from mechanical shocks) to the product.
•
Use applicable means-of-transport with dimensions which are sufficient. Use (if necessary) the
correct work equipment and accessories. Refer to “Dimensions” and “Technical specifications”.
Make sure that the working conditions comply with the, local or national, laws and regulations.
•
Make sure that storage areas and the areas in the means-of-transport are dry and the airflow is
sufficient.
•
Make sure that the products do not touch the (moist) bottom surface of storage areas and of the
means-of-transport (use pallets or such). The bottom surfaces must be smooth.
•
Make sure that the products are protected from dust, dirt and direct sunlight.
•
Apply an applicable corrosion-preventive agent to surfaces that are not painted.
•
After installation discard the packaging and obey the applicable national and/or local regulations.
Safety instructions
•
Use (if applicable) personal protective-equipment for protection which agrees with the different
types of work.
•
Do not let persons and not approved personnel be near controls and systems in operation.
•
Damaged systems must be stopped immediately until they are repaired.
•
Use safety barriers, for system parts that move, to a height of 2.5 m from the ground.
•
The safety distance to the danger zone (if applicable) must agree with ISO 13857:2008.
• Do not operate systems when persons are in the danger zone and can touch the system.
•
Monitor the danger zone when you work with or near the system.
•
Stop and de-energize systems during maintenance and cleaning work on or near the system.
•
Make sure that there is sufficient space between parts that move and adjacent objects.
•
Stay away from or safety areas where there is a risk to become caught in a system that moves.
•
The torque and the duty cycle of the system must be in the range of the motor gearbox
parameters. Refer to the product manual of the used Ridder motor-gearbox at
.
If you do not obey the safety instructions that follow it can be
dangerous and cause injury.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
5
Содержание LogicLink RLL400
Страница 32: ......
