Ricon B156, Руководство по обслуживанию

Страница: 738 / 781

FAX COMMUNICATION FEATURES 10 February 2005
B750 124 SM
5.4.3 INTERNET MAIL COMMUNICATION
Mail Transmission
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC –
Internet/LAN Fax Boards – Mail Transmission
Data Formats
The scanned data is converted into a TIFF-F formatted file (only MH compression
can be used).
The fields of the e-mail and their contents are as follows:
Field Content
From Mail address of the sender
Reply To Destination requested for reply
To Mail address of the destination
Bcc Backup mail address
Subject From CSI or RTI (Fax Message No. xxxx)
Content Type Multipart/mixed
Attached files: image/tiff
Content Transfer Encoding Base 64, 7-bit, 8-bit, Quoted Printable
Message Body MIME-converted TIFF-F (MIME standards specify how files
are attached to e-mail messages)
Selectable Options
These options are available for selection:
•
With the default settings, the scan resolution can be either standard or detail.
Inch-mm conversion before TX depends on IFAX SW01 Bit 7. Detail resolution
will be used if Super Fine resolution is selected, unless Fine resolution is enabled
with IFAX SW01.
•
The requirements for originals (document size, scan width, and memory
capacity) are the same as for G3 fax memory tx.
•
The default compression is TIFF-F format.
•
IFAX SW00: Acceptable paper widths for sending
•
IFAX SW09: Maximum number of attempts to the same destination
Secure Internet Transmission
• SMTP Authentication :
User Tools> System Settings> File Transfer> SMTP Authentication
•
POP Before SMTP :
User Tools> System Settings> File Transfer> POP Before SMTP