Ricon B156, Руководство по обслуживанию

Страница: 178 / 781

COLOR ADJUSTMENT
B156/B220 3-66 SM
3.13.2 PRINTER GAMMA CORRECTION
NOTE: Normally, the ACC is enough to adjust the color balance to achieve the
optimum print output. The printer gamma correction is only required for
fine-tuning to meet user requirements.
The printer gamma curve created during ACC can be modified using SP modes.
The SP value will be applied to the gamma curve created during ACC.
The gamma data for highlight, middle, shadow areas, and IDmax can be adjusted.
The adjustable range is from 0 to 30 (31 steps).
Copy Mode
KCMY Color Balance Adjustment
Adjust only the “Offset” values.
NOTE: Never change the “Option” values (default values are 0).
Highlight (Low ID) Levels 2 through 5 in the C4 chart 10-level scale
Middle (Middle ID) Levels 3 through 7 in the C4 chart 10-level scale
Shadow (High ID) Levels 6 through 9 in the C4 chart 10-level scale
ID max
Level 10 in the C4 chart 10-level scale (affects the entire image
density.)
Offset
The higher the number in the range associated with the low ID,
middle ID, high ID, and ID max, the greater the density.
There are four adjustable modes:
• Text (Letter) mode: full colour
•
Photo mode: full colour
•
Text (Letter) mode: single color (SC)
•
Photo mode: single color (SC)
SP 4-918 screen: The screen with SC on it is for single colour mode settings. The
other two screens are for full colour mode settings.
B502R500.WMF