Ricon B156, Руководство по обслуживанию

Страница: 249 / 781

SERVICE PROGRAM MODE
SM 5-21 B156/B220
Service
Tables
4
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
1 Dust Check Turns DF glass dust detection on/off.
[0 ~ 1 /
0 / 1 /step]
• 0: OFF
•
1: ON
2 Detect Level Selects the detection level.
[0 ~ 8 /
4 / 1 /step]
0: Least detailed detection, 8: Most detailed detection
3 Image Correct Level Selects the vertical line correction when using the DF.
[0 ~ 4 /
0 / 1 /step]
0: Disables image correction level
4: Most effective correction
APS Data Confirmation 301
APS Data
Confirmation
Displays the status of the APS sensors and platen/DF
cover sensor.
APS Minimum Size Setting 303
Selects whether the copier determines that the original is
A5 sideways or lengthwise size when the APS sensor
cannot detect the size.
[0
∼
2 / 0 / 1 /step]
If “2: A5 lengthwise” is selected, paper sizes that cannot
be detected by the APS sensors are regarded as A5
lengthwise.
If “1: A5 sideways” is selected, paper sizes that cannot be
detected by the APS sensors are regarded as A5
sideways.
If “0: Not detected” is selected, “Cannot detect original
size” will be displayed.
ADF Size Change 305
Selects the original size type for the default original size
detection.
[0 ~ 2 /
0 / 1 /step]
0: Standard
1: A4/LT
2: 8K/16K
Scanning Blank Margin
1 Book: Lead Edge L
2 Book: Trail Edge R
3 Book: Left
4 Book: Right
Specifies the scanning blank margin for each edge in
platen mode.
[ 0 ~ 3.0 /
0 / 0.1 mm/step]
5 ADF: Lead Edge
7 ADF: Left
400
8 ADF: Right
Specifies the scanning blank margin for each edge in ADF
mode.
[ 0 ~ 3.0 /
0 / 0.1 mm/step]
417 IPU Test Pattern Select