Ricon B156, Руководство по обслуживанию

Страница: 264 / 781

SERVICE PROGRAM MODE
B156/B220 5-36 SM
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Remote Service
1 I/F Setting Selects the remote service setting.
[0 ~ 2 /
2 / 1 /step]
•
0: Remote service off
•
1: CSS remote service on
•
2: NRS remote service on
2 CE Call Performs the CE Call at the start or end of the service.
[0 ~ 1 /
0 / 1 /step]
• 0: Start of the service
•
1: End of the service
This SP is activated only when SP 5816-001 is set to
“2”.
3 Function Flag Enables/disables the remote service function.
[0 ~ 1 /
0 / 1 /step]
• 0: Disabled
•
1: Enabled
4 Communicate Test
Call Communication Test Call
5 Device Information
Call Device Information Call
6 Device Information
Call Display Setting Displays/does not display the device information call
content.
[0 ~ 1 /
0 / 1 /step]
•
0: Not displayed
• 1: Displayed
7 SSL Disable Uses/does not use the RCG certification by SSL when
calling the RCG.
[0 ~ 1 /
0 / 1 /step]
• 0: Uses the RCG certification
•
1: Does no use the RCG certification
8 RCG Connect Timeout Specifies the connect timeout interval when calling the
RCG.
[1 ~ 90 /
10 / 1 second/step]
9 RCG Write Timeout Specifies the write timeout interval when calling the
RCG.
[0 ~ 100 /
60 / 1 second/step]
10 RCG Read Timeout Specifies the read timeout interval when calling the
RCG.
[0 ~ 100 /
60 / 1 second/step]
816
11 Port 80 Enable Enables/disables the access via port 80 to the SOAP
(Simple Object Access Protocol) method.
[0 ~ 1 /
0 / 1 /step]
• 0: Disabled
•
1: Enabled
Remote Service Address
1 CSS-PI device code Selects the PI device code.
[0
∼
4 / 0 / 1 /step]
To validate the setting, turn off and on the main power
switch.
821
2 RCG IP Address Sets the RCG IP address for calling the center.