Ricon B156, Руководство по обслуживанию

Страница: 713 / 781

NCU PARAMETERS
SM 99 B750
Fax Op
tion
Type 32
32
B75
0
Address Function Unit Remarks
68057B
to
680580
Not used Do not change the
settings.
680581 Interval between dialing the last digit
and switching the Oh relay over to
the external telephone when dialing
from the operation panel in handset
mode. 20 ms Factory setting: 500 ms
680582 Bits 0 and 1 - Handset off-hook detection time
Bit 1 0 Setting
0 0 200 ms
0 1 800 ms
Other Not used
Bits 2 and 3 - Handset on-hook detection time
Bit 3 2 Setting
0 0 200 ms
0 1 800 ms
Other Not used
Bits 4 to 7 - Not used
680583
to
6805A0
Not used Do not change the
settings.
6805A1 Acceptable CED detection frequency
upper limit (high byte)
6805A2
Acceptable CED detection frequency
upper limit (low byte)
BCD (Hz) If both addresses contain
FF(H), tone detection is
disabled.
6805A3 Acceptable CED detection frequency
lower limit (high byte)
6805A4 Acceptable CED detection frequency
lower limit (low byte)
BCD (Hz) If both addresses contain
FF(H), tone detection is
disabled.
6805A5 CED detection time 20 ms
± 20 ms
Factory setting: 200 ms
6805A6 Acceptable CNG detection frequency
upper limit (high byte)
6805A7
Acceptable CNG detection frequency
upper limit (low byte)
BCD (Hz) If both addresses contain
FF(H), tone detection is
disabled.
6805A8 Acceptable CNG detection frequency
lower limit (high byte)
6805A9 Acceptable CNG detection frequency
lower limit (low byte)
BCD (Hz) If both addresses contain
FF(H), tone detection is
disabled.
6805AA Not used Do not change the
setting.
6805AB CNG on time 20 ms Factory setting: 500 ms
6805AC CNG off time 20 ms Factory setting: 200 ms
6805AD Number of CNG cycles required for
detection The data is coded in the
same way as address
680533.
6805AE Not used Do not change the
settings.