Ricoh SP C260SFNw, Руководство пользователя, Страница: 426 / 444

Energy efficiency
The amount of electricity a machine consumes depends as much on its specifications as it does on
the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
Ready mode after it prints the last page. If required, it can immediately print again from this mode.
If no additional prints are required and a specified period of time passes, the device switches to an
energy saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
a little longer to return from an energy saving mode than from Ready mode.
For maximum energy savings, we recommend that the default setting for power management is
used.
Notice To Wireless LAN Interface Users (mainly Europe)
Declaration of Conformity
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of Directive 2014/53/EU.
The CE Declaration of Conformity is available by accessing the URL: http://www.ricoh.com/products/
ce_doc2/
and selecting the product applicable.
Operating frequency band: 2400 - 2483.5 MHz
maximum radio-frequency power: less than 20.0 dBm
As this equipment with the radiating part is not intended to be used in close proximity to the human
body, it is recommended to use at least 20cm apart from the user.
NOTES TO USERS REGARDING FACSIMILE UNIT (NEW ZEALAND)
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a
different make or model, nor does it imply that any product is compatible with all of Telecom's network
services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds
for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.
12. Appendix
424