T
echnical
B
ulletin
PAGE: 4/5
Model:
Shepherd-P1
Date:
16-Oct-18
No.:
RJ093003
4.
Install the two proximity sensors and proximity sensor cover (left) on the left side of the
gantry in the same way.
5.
Connecting the cable of sensor with relay cable. [A]
Adjust the length of the cable by Inserting the excess length of the cable into the hole.
[B]
6.
Adjust the light receiving amount.
Following steps are available after turning power on.
6-1.
Check that the light level indication lamp turns green.
-If all 5 lamps turn on, installing procedure of the sensors are finished.
-If even one lamp does NOT turn on, adjust the level by following 7-2 step.
Lighting
Lighting-off
Target
Light level
Indication Lump
