T
echnical
B
ulletin
PAGE: 2/4
Reissued: 17-Oct-19
Model: Shepherd-Lt
Date:
15-Oct-19
No.:
RM0D4006a
No.
Description
No.
Description
[C] Nut for fixing adjustment screw to
body frame
*1
*1 Use 24mm wrench to rotate the screw
*2 Use 12mm wrench to rotate the screw
*3 Use the hexagonal wrench for rotate the screw
Sequence of table adjustment using adjustment mechanism is below.
Adjustment method for table height
1. Loosen the nut [A] that used to fix adjustment screw to body frame [B].
2. Loosen the bolt [A] that used to fix adjustment screw to table [C], by rotating
bolt for a single rotation.
Do not rotate the adjustment screw [B] without loosing the bolt [A] because it
may cause thread stripping of the tapped holes on table [C]
3. Adjust the height of table using the adjustment screw [A].
