T
echnical
B
ulletin
PAGE: 14/23
Model: Shepherd-Lt
Date: 7th
-Oct-19
No.:
RM0D4011
2. Installation>Main Machine Installation>Installation Procedure>
Filling the Print
Heads with Ink
Filling the Print Heads with Ink
1.
Connect the seven connectors from the carriage board 1 [A], disconnected in “Disconnecting
the Connectors (Between Carriage Board 1 and Sub Tanks)”.
The connector number is marked on the carriage board 1. Connect the connectors to the right
places.
Standard Mode : 1:W, 2:C, 3:M, 4:Y, 5:K, 6:Cl, 7:Pr
Double White Mode : 1:W, 2:C, 3:M, 4,Y, 5:K, 6:W2
Before doing the following procedure, make sure that the table front right cover is open. If the
Print Control software is started up when the table front right cover is closed, the carriage
starts the initializing operation and starts moving while the ink drops down from the print
heads.
2. Press the power-on button on the front of the machine. Start up the Print Control
software on the computer. (
Starting the Print Control Software
)
The machine automatically executes the ink filling and operation check.
While ink is filling, the remaining ink indicator [A] at the lower right corner of the Print Control
screen flashes. After the ink filling is done, the respective color is displayed as shown below.
