T
echnical
B
ulletin
PAGE: 3/4
Model: Shepherd-P1, Shepherd-Lt
Date:17-Oct-19
No.: RM0D4014
[PH Parameters] as shown below.
6.
Click [Apply].
Base Voltage should be set to 0V.
Don’t change Base voltage value.
If the print quality is not stable as shown in the picture below, adjust the image quality by adding 0V to
1.0V from the values in the table above.
For example, when the print head voltage A is 19.7V, the adjusting voltage values will be A:
0.1V(adding 0V) to 1.1V(adding 1.0V).
Fix the adjustment voltage depending on the printed quality if necessary.
0.1V
0.2V
