Ricoh RC Gate A TTP, Руководство пользователя

Страница: 127 / 171

RC Gate A Training
127
Slide 127
The Time Required for Transition Work
Second and following RC Gates –
continued
2 min.
(Execute
Test call)
RC Gate Removal
5
• This is operation time only.
• Actually, you may have to wait for hourly
polling to execute the request.
• You can avoid to wait for hourly polling by
executing a Test Call from RC Gate A.
• Steps 4 and 5 do not need to be performed
each time you perform this procedure for
each individual RC Gate; Instead, you can
do these steps at the end, for all RC Gates
at once.
5 min.
(Execute
Test call)
Remote Registration from
Center
（
Must be finished at least one time
to complete performing AD
）
4
• The time required to register 100 devices at
one time is estimated as 3 min.
• The above estimation is based on the result
of designer’s testing; it takes 13 min. of
processing time to register 500 devices at
one time.
• This estimation is the case when no devices
failed registration.
* 10 min. Device Registration (100
devices)
3
No.
32 min. 10 min. Total Time
Remarks Center On Site Item
For transition of the second and following RC Gates, it will take less than half the time of the original RC Gate.
It takes 13 min. of processing time to register 500 devices at one time.
ˆ
So, for RC Gate A (maximum of 1000 devices), it takes up to 26 minutes.
ˆ
And for RC Gate S Pro (maximum of 5000 devices), it takes up to 2 and a half
hours.