Ricoh RC Gate A TTP, Руководство пользователя

Страница: 125 / 171

RC Gate A Training
125
Slide 125
The Time Required for Transition Work
2 min.
(Execute
Test call)
RC Gate Removal
8
• This is operation time only.
• Actually, you may have to wait for hourly
polling to execute the request.
• You can avoid waiting for hourly polling by
executing a Test Call from RC Gate A.
• Steps 7 and 8 do not need to be performed
each time you perform this procedure for each
individual RC Gate; Instead, you can do these
steps at the end, for all RC Gates at once.
5 min.
(Execute
Test call)
Remote Registration from
Center
（
Must be finished at least one time
to complete performing AD
）
7
• The time required to register 100 devices at
one time is estimated as 3 min.
• The above estimation is based on the result of
designer’s testing; it takes 13 min. of
processing time to register 500 devices at one
time.
• This estimation is the case when no devices
failed registration.
* 10 min. Device Registration (100
devices)
6
No.
60 min. 43 – 73
min.
Total Time
Remarks Center On Site Item
Original RC Gate –
continued
For transition of the original (first) RC Gate, it will take more than one hour (this work includes carrying over the
parameters to the RC Gate A, copying the RC Gate settings, downloading several CSV files, etc.).
You can estimate how long it will take
to register 1000, 3000, 5000 devices
based on this figure.
It takes 13 min. of processing time to register 500 devices at one time.
ˆ
So, for RC Gate A (maximum of 1000 devices), it takes up to 26 minutes.
ˆ
And for RC Gate S Pro (maximum of 5000 devices), it takes up to 2 and a half
hours.
ˆ
Each registration operation can handle up to 500 devices, so you have to do up
to 2 operations for the RC Gate A, or up to 10 operations for the RC Gate S Pro.