Ricoh RC Gate A TTP Скачать руководство пользователя страница 150

Страница: 150 / 171

RC Gate A Training

150

Slide 150

11. Check the Device List for the RC Gate A

During the Device Registration Wizard, the RC Gate A
contacts the @Remote Center with the new device data.

So, the device list at the Center GUI for the new RC Gate A
should contain all the registered devices.

Check this list.

Compare it with the exported device list CSV files that you
made earlier.

Make sure that all devices are registered and Managed

If any failed, investigate, and try to recover.

If some devices still cannot be registered and Managed,
wait one day and try from the @Remote Center with
Remote Registration (see the next slide)

Each registration operation can handle up to 500 devices, so you have to do up
to 2 operations for the RC Gate A. Before you give up and go on to remote
registration, make sure to finish all operations first.

Содержание RC Gate A TTP












































































































































































Результаты поиска

Содержание RC Gate A TTP

Отзывы:

Ricoh RC Gate A TTP, Руководство пользователя, Страница: 150 / 171

Результаты поиска

Содержание RC Gate A TTP

Отзывы: