manualshive.com logo in svg

Ricoh PRSPC342DN1, Руководство пользователя, Страница: 79 / 120

Поделиться
Скачать
Ricoh PRSPC342DN1 Скачать руководство пользователя страница 79

5.

Turn on the main power switch of the printer.

1

2

3

CSJ304

1. Indicator (green)

When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating or the printer is not
connected to a network, it is turned off.

2. Indicator (orange)

When 100BASE-TX is operating, the LED is lit orange. When 10BASE-T is operating or the printer is not
connected to a network, it is turned off.

3. Indicators (both orange and green)

When 1000BASE-T is operating, both LEDs are lit.
The LEDs turn off when the Ethernet cable is disconnected or the printer is in Sleep Mode.

6.

Attach the cable cover.

DPP029

• Use an Ethernet interface cable that supports the speed that you selected for "Ethernet Speed". If

you select [Auto Select: Enable 1Gbps] for "Ethernet Speed", use an Ethernet interface cable that
supports 1000BASE-T.

• Check the type of the plug before connecting.
• Do not pull the connected cable forcefully. Make sure the cable is properly connected. Otherwise,

it might become disconnected or somebody might trip on it.

• Using a cable with some connectors or converters may result in an improper connection.

Connecting the Printer

midas-p3_com_operating_instructions_gb_00198490_eng.xml

79

Draft 2016/01/18

Содержание PRSPC342DN1

























































































































Отзывы:

Нет отзывов