manualshive.com logo in svg

Ricoh PRSPC342DN1, Руководство пользователя, Страница: 65 / 120

Поделиться
Скачать
Ricoh PRSPC342DN1 Скачать руководство пользователя страница 65

• Check that the board was correctly installed by printing the configuration page. If it is correctly

installed, "Wireless LAN" will appear for "Device Connection" on the configuration page. For
details about printing the configuration page, see page 100 "Test Printing".

• If the board was not installed properly, repeat the procedure from the beginning. If it cannot be

installed correctly even after trying the installation a second time, contact your sales or service
representative.

• Before using the board, you must configure settings from the printer control panel. For details, see

page 93 "Wireless LAN Configuration".

Installing the IEEE 1284 interface board

1.

Check the contents of the package.

2.

Turn the printer off and unplug the power cord.

3.

Remove the cable cover.

DPP025

4.

Loosen the two screws and remove the slot cover.

DPP026

The removed cover will not be reused.

Installing Options

midas-p3_com_operating_instructions_gb_00198474_eng.xml

65

Draft 2016/01/18

Содержание PRSPC342DN1

























































































































Отзывы:

Нет отзывов