manualshive.com logo in svg

Ricoh PRSPC342DN1, Руководство пользователя, Страница: 22 / 120

Поделиться
Скачать
Ricoh PRSPC342DN1 Скачать руководство пользователя страница 22

9. [Energy Saver] key

Press to switch to and from Sleep mode. See page 74 "Saving Energy". When the printer is in Sleep mode,
the [Energy Saver] key flashes slowly.

10. [Login/Logout] key

Press to log in or log out.

11. [User Tools] key

Press to change the default settings as needed. See page 212 "Configuring Printer Settings from the [User
Tools] key".

12. [Simple Screen] key

Press to switch to the simple screen. See page 28 "Switching screen patterns".

13. Media slots

Insert an SD card or a USB flash memory device.

14. Media access lamp

Lights up when a memory storage device is inserted in the media slot or is being accessed.

Guide to the Names and Functions of the Control Panel Screen

DPP083

1. Operational Status or Messages

Displays the printer status and messages.

2. [Option]

Press to display the following items:

• Form Feed
• Error Log

3. [Supplies]

Press to display the information about printer supplies.

• By default, the remaining amount of toner is displayed. To avoid displaying the remaining amount

of toner, set [Display Supply Info] to [Off] in [General Settings] under [Maintenance].

1. Getting Started

22

midas-p3_com_operating_instructions_gb_00198424_eng.xml

Draft 2016/01/18

Содержание PRSPC342DN1

























































































































Отзывы:

Нет отзывов