Ricoh Priport JP5000 Скачать руководство пользователя страница 7

Страница: 7 / 232

iii

Caution:

•

Keep the machine away from humidity and dust. A fire or an elec-
tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it top-
ples over, it could cause injury.

•

After you move the machine, fix it with the caster fixture. Other-
wise, the machine might move or come down to cause a personal
injury.

•

When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.

•

When the machine will not be used for a long time, unplug the
power cord.

•

When you pull out the plug from the socket, grip the plug to avoid
damaging the cord and causing fire or electric shock.

•

If you use the machine in a confined space, make sure there is a
continuous air turnover.

•

Do not reuse stapled paper. Do not use aluminum foil, carbon-
containing paper or other conductive paper. Otherwise, a fire
might occur.

•

This machine has been tested for safety using this supplier's
parts and consumables. We recommend you only use these
specified supplies.

•

This equipment is only to be installed by a qualified service per-
sonnel.

•

Deliver to collection point for waste products. Do not be disposed
of via domestic refuse collection.

•

If ink comes into contact with your eyes, rinse immediately in run-
ning water. In the case of any abnormal symptoms, consult a
doctor.

Содержание Priport JP5000








































































































































































































































Результаты поиска

Содержание Priport JP5000

Отзывы:

Ricoh Priport JP5000, Руководство по эксплуатации, Страница: 7 / 232

Результаты поиска

Содержание Priport JP5000

Отзывы: