Ricoh Priport JP5000 Скачать руководство пользователя страница 215

Страница: 215 / 232

Where To Put Your Machine

193

Where To Put Your Machine

Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.

Environmental Conditions

Optimum environmental conditions

WARNING:

CAUTION:

• Temperature: 10 – 30

C, 50 – 86

• Humidity: 20 – 90 % RH
• A strong and level base (a sturdy desk and cabinet etc.).
• The machine must be level within 5 mm,

" both front to rear and left to

right.

• Be sure to locate this machine in a large well ventilated room that has an air

turnover of more than 30 m

/hr/person.

Environments to avoid

• Locations exposed to direct sunlight or strong light (more than 1500 lux).

•

Do not put any metal objects or containers holding water
(e.g. vases, flowerpots, glasses) on the machine. If the con-
tents fall inside the machine, a fire or electric shock could
occur.

•

Keep the machine away from humidity and dust. A fire or an elec-
tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it top-
ples over, it could cause injury.

•

If you use the machine in a confined space, make sure there is a
continuous air turnover.

•

After you move the machine, fix it with the caster fixture. Other-
wise, the machine might move or come down to cause a personal
injury.

Содержание Priport JP5000








































































































































































































































Результаты поиска

Содержание Priport JP5000

Отзывы:

Ricoh Priport JP5000, Руководство по эксплуатации, Страница: 215 / 232

Результаты поиска

Содержание Priport JP5000

Отзывы: