Ricoh PJ WX5350, Руководство по обслуживанию на месте

Страница: 92 / 155

* To restore the time, click [RESET] button. It restores to the initial data.
Error messages
• “TIME OUT (ACK) !”
This is a communication error in conjunction with the PJ.
Check the Serial Port Number, BaundRate, and whether the PJ main Power is turned ON.
• “TIME OUT (Data) !”, “RsRead Error,” , “Data Send Error!!”, “DATA READ ERROR”, “Model
check Error (Data Read)!!”
This is a communication error in conjunction with the PJ.
Check the connection, and error occurrence in the PJ, then retry.
In case it occurs 2 or 3 times consecutively, reboot the PC.
• “Comm Open Error”
This is a failure in opening the serial port.
Check the Serial Port Number.
Make sure that there is no other application using the same Serial Port.
• “TIME OUT (Comm Close Error) !”, “Comm Close Error”
This is a failure in closing the serial port.
Confirm if there is any application that occupies the serial port.
In case it occurs 2 or 3 times consecutively, reboot the PC.
• “File format error”, “Address error”
The data format of the file specified when executing data writing from the file is not correct.
Make sure that it is a file read in PJ X5360N/PJ WX5350N.
• “ACK Error!!”
Check the status of the PJ, and retry.
* For instance, you may have done an operation with Power OFF, which should have been
done with Power ON.
In case it occurs 2 or 3 times consecutively, reboot the PC.
If not recovering from this error after operating the above, the PJ may be in trouble.
• “Model name error!!”
The target PJ is not PJ-X5360N or PJ-WX5350N.
• “Model check Error (2)!!”
The current target PJ is not the one executed [Adjust Start].
Restart from [Adjust Start], in case adjusting current target PJ.
• “Comparison error”
The data is not successfully written. Retry writing.
3. Replacement and Adjustment
90