F3
lite
SURGE PROTECTED
MAINS FILTER
USER MANUAL
Thank-you for purchasing this Wychwood Audionics F3 MDU
please read this manual carefully before use
The
F3 lite
is equipped with surge protection and EMI/RFI filtration to protect
you and your equipment. Its hard-wired design, star-earthing, filtered
power, high current ability and grounded alloy enclosure also ensures your
system always sounds its best!
It is a simple device to use – you will require a 13 amp fused IEC-terminated
power lead (“kettle lead”) to provide power - we recommend and can
supply
Supra’s LoRad
screened mains leads.
Any audio device can be plugged-in to the F3 using power leads equipped
with a UK 3-pin mains plug. Each such lead must have a properly rated fuse
for the appliance connected; your equipment manufacturer can advise on
the appropriate rating. Each connected device should be switched-on
individually once the F3 is live.
The maximum safe load connected to the F3 should not exceed 3500 Watts
/ 16 Amps. For reference a typical hifi system will draw between 200-1000
Watts / 1-4 Amps
