Ricoh PJ WX5350, Руководство по обслуживанию на месте

Страница: 23 / 155

• Do not send the projector in the soft case by parcel delivery service or cargo shipment. The
projector inside the soft case could be damaged.
• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the
menu, select [SETUP] [OPTIONS(1)] [FAN MODE] [HIGH].)
• Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can
become heated while the projector is turned on and immediately after the projector is turned
off.
• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the Power
indicator is blinking blue. Doing so could cause premature lamp failure.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• Do not throw batteries into fire.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries’ polarity (+/−) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
Note for US Residents
The lamp in this product contains mercury. Please dispose according to Local, State or Federal
Laws.
Lamp Replacement
• Use the specified lamp for safety and performance.
• To replace the lamp, follow all instructions provided on User’s Manual (
Replacing the Lamp
and the Filters (page 146)).
• Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF
ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the
lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of
glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.
If this happens, contact your dealer for lamp replacement.
A Lamp Characteristic
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly
turning the lamp on and off will increase the possibility of its lower brightness.
Installation Requirements
21