Ricoh PJ WX5350, Руководство по обслуживанию на месте

Страница: 117 / 155

[A] : Stereo mini plug - to - RCA audio cable (not supplied)
[B] : Monitor cable Stereo mini plug - to - RCA able Mini D-sub 15P-BNC (not supplied)
[C] : Conversion adapter BNC-pin (not supplied) To Y/Cb/Cr output Green(Y)/Blue(Cb)/Red (Cr)
[D] : Audio cable (not supplied)
[E] : Audio Equipment
[F] : DVD player
A component signal will be automatically displayed. If not, from the menu, select [SETUP]
[OPTIONS(1)] [SIGNAL SELECT] [COMPUTER1] or [COMPUTER2], and then place a check
mark in the Component radio button.
Select the source name for its appropriate input connector after turning on the projector.
Input connector
Input button on the projector
cabinet
Button on the remote control
COMPUTER 1 IN COMPUTER 1 Computer 1
COMPUTER 2 IN COMPUTER 2 Computer 2
• Refer to your DVD player’s owner’s manual for more information about your DVD player’s video
output requirements.
Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook
type PC to the HDMI In connector of your projector.
• The HDMI In connector supports Plug & Play (DDC2B).
Functional Test
115