Ricoh PJ WX3340N, Руководство по эксплуатации

Страница: 34 / 160

CUD094
Using a DVI-to-HDMI cable
To input a DVI signal to the projector, connect a DVI-to-HDMI cable to the HDMI port of the projector
and to the DVI output of a computer. To output audio from the speaker on the projector, connect an
audio cable to the Audio In port of the projector and to the audio output of a computer.
CUC032
• You can use a DVI-to-HDMI conversion adapter instead of a DVI-to-HDMI cable.
Using an Ethernet cable
Connect an Ethernet cable to the Ethernet interface of the projector and to a network device such as a
hub. To use the projector via a network, you must specify settings such as the IP address. For details, see
page 62 "Connecting the Projector to a Network".
CUD095
• Use an Ethernet cable that is shielded.
Using a wireless LAN
The RICOH PJ X3340N/WX3340N/WX4240N are equipped with a wireless connectivity function. To
use the projector via a network, you must specify settings such as the IP address. For details, see
page 62 "Connecting the Projector to a Network".
1. Preparations for Using the Projector
32