manualshive.com logo in svg

Ricoh P C311W, Руководство пользователя, Страница: 212 / 224

Поделиться
Скачать
Ricoh P C311W Скачать руководство пользователя страница 212

This product complies with the essential requirements and provisions of Directive 2014/53/EU.

The CE Declaration of Conformity is available by accessing the URL:
https://www.ricoh.com/products/ce_doc2/
and selecting the product applicable.
Operating frequency band: 2412-2462 MHz, 5150-5350MHz
RF Output Power: 17dBm - 802.11b / 15dBm – 802.11g / 13dBm – 802.11a / 13dBm –
802.11n / 11dBm – 802.11ac
Operating frequency band: 13.56Mhz
Maximum radio-frequency power: less than 42dB A/m (at 10m)
*Maximum radio-frequency power is depended on power value of reader/writer device.
Outdoor use of the 5GHz band is prohibited.
As this equipment with the radiating part is not intended to be used in close proximity to the human
body, it is recommended to use at least 20cm apart from the user.

Notes to users in the state of California (Notes to Users in USA)

Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate

Notes to users in the United States of America

FCC Rules

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.

9. Appendix

210

Содержание P C311W

































































































































































































































Отзывы:

Нет отзывов