manualshive.com logo in svg

Ricoh MP 2001, Руководство по эксплуатации

Поделиться
Скачать
Ricoh MP 2001 Скачать руководство пользователя страница 2

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your

 

safety and 

benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick 
reference.

Important

Contents of this manual are subject to change without prior notice.
To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any damages 
whatsoever arising out of failures of this machine, losses of the registered data, or the use of this product and 
operation manuals provided with it.
Make sure that you always copy or have backups of the data registered in this machine. Documents or data might 
be erased due to your operational errors or malfunctions of the machine. 
In no event will the manufacturer be responsible for any documents created by you using this machine or any 
results from the data executed by you.

Notes

Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.

Laser Safety:

This machine complies with the requirements of IEC60825-1:2007 (EN60825-1:2007) for class 1 laser product. 
This machine contains one AlGaInP laser diode, 9 milliwatts, 648-663 nanometer wavelength. The beam 
divergence angle is 28 degrees (minimum) and 35 degrees (maximum) in the vertical direction, and 7 degrees 
(minimum) and 10 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous 
Wave (CW) mode.
The following label is attached on the rear side of the machine:

Caution:

Use of controls or adjustments or performance of procedures other than those specified in this manual might result 
in hazardous radiation exposure.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good output quality, the manufacturer recommends that you use genuine toner from the manufacturer.

The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other 
than genuine parts from the manufacturer with your office products.

Power Source

220 - 240V, 50/60Hz, 8A
Please be sure to connect the power cord to a power source as above. For details about power source, see page 
121 “Power Connection”.

Содержание MP 2001





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды